Heat-treatment Fiberglass Sleeving
|
|
|
Properties |
|
Heat-treatment
fiberglass sleeving is made of non-alkali fiberglass braided
sleeving processed with dewax and reshape under high
tempurature then impregnated with little silicone resin
outside. It has good property of extreme tensile strength.
This kind of sleeving can be used as an excellent insulating
material for the wiring of electrical machinery and
appliances and domestic electrical appliances. |
|
Size and tolerance |
|
ID
(Inner Diameter, Unit: mm) |
Wall
Thickness (Unit: mm) |
|
Standard |
Tolerance |
|
1.0~1.5 |
+0.20 -0.10 |
0.20±0.05 |
|
2.0~3.5 |
+0.30 -0.10 |
0.30±0.05 |
|
4.0~6.0 |
+0.40 -0.20 |
0.40±0.10 |
|
7.0~9.0 |
+0.50 -0.30 |
0.50±0.15 |
|
|
Data Form |
|
Properties |
Unit |
Value |
|
Heat resistance |
- |
The sleeving will not
harden and give off any smoke at the temperature of 500±10℃
in a stove |
|
Cutting feature |
- |
When the sleeving is
cut, the crosscut will not get loose, but remain smooth |
|
Tensile strength |
MPA |
≥90 |
|
Insulation Class |
℃ |
180 (Class H) |
|
|
Specification |
|
1.
Length: 1000
mm, continuous length may be negotiated |
|
2. Color:
Nature color is white, other color may be negotiated |
|
3. Packing: In Carton or Bag |
|
4. Min Qty: Not less than 400,000m in a lot, and 5,000m each
size. |
|
Note:
The values noted in above technical specification are given
only for our customers’ reference
and should not be used in writing
specifications. |
CURRENT
PRODUCT
